Displaying Trace Data Storage Status - Fujitsu SOFTUNE F2 MC-16 User Manual

2.2.8.5

Displaying Trace Data Storage Status

It is possible to Displays how much trace data is stored in the trace buffer. This status
data can be read by specifying /STATUS to the SHOW TRACE command in the single
trace mode, and to the SHOW MULTITRACE command in the multi trace mode.
■ Displaying Trace Data Storage Status
It is possible to Displays how much trace data is stored in the trace buffer. This status data can be read by
specifying /STATUS to the SHOW TRACE command in the single trace mode, and to the SHOW MULTITRACE
command in the multi trace.
Frame numbers displayed in the multi trace mode is the global number.
[Example]
- In Single Trace
en/dis
buffer full = nobreak
sampling
frame no. = -00120 to
step no.
- In Multi trace
en/dis
buffer full = nobreak
sampling
block no. = 1 to 5
frame no. = 00001 to 00159
>SHOW TRACE/STATUS
= enable
= end
= -00091 to
>
>SHOW MULTITRACE/STATUS
= enable
= end
CHAPTER 2 DEPENDENCE FUNCTIONS
: Trace function enabled
: Buffer full break function disabled
: Trace sampling terminates
00050 : Frame -120 to 50 store data
00022 : Step -91 to 22 store data
: Multi trace function enabled
: Buffer full break function disabled
: Trace sampling terminates
: Block 1 to 5 store data
: Frame 1 to 159 store data
(Global number)
113