Rapid Startup Wizard Automatically Advances; Renaming Host Forces A Restart Where The Restart Page Does Not Refresh; Altering The Network Interface From Dhcp To Static Causes The Page Not To Return; Managing Ntfs Mount Points - HP StorageWorks 1200s - NAS Release Note

Rapid Startup Wizard automatically advances

If no changes are made to the Date and Time Settings page of the
Rapid Startup Wizard, the page will automatically advance to the
next page of the Rapid Startup Wizard after one minute. This
occurs to retain the appropriate time on the system.
Renaming host forces a restart where the restart page does
not refresh
When renaming the host or altering the host name in the Rapid
Startup Wizard, the restart page does not refresh to the Welcome
page. To resolve the issue, retype the new host name in the
address bar on port 3202.
Altering the Network interface from DHCP to static causes the
page not to return
If the Web UI is used to alter the IP settings of the port from
which you are managing, the host will be unreachable from the
current address. When this happens, the network interface page
buttons become grayed out and the page does not return,
although the settings take affect. To access the Web UI again,
close and open the browser and navigate to the newly identified
management port.

Managing NTFS Mount points

There is currently no facility for managing NTFS mount points
in the Web UI. To create or manage NTFS mount points, you
must use Remote Desktop. To start Remote Desktop, select
Maintenance > Remote Desktop on the navigation menu.
HP StorageWorks NAS 1200s Release Notes 11