Transceiver Information - Qlogic SANbox 5000 Series Interface Manual

6 – Port Configuration
Displaying Port Information
6.1.5

Transceiver Information

NOTE:
Enter the
more transceivers as shown in the following example. Refer to
description of the transceiver information in the Show Media display.
SANbox #> show media 4
Port Number: 4
-------------
MediaType
MediaVendor
MediaPartNumber
MediaRevision
MediaSerialNumber
MediaSpeeds
6-6
The Show Media command requires the SANdoctor license key. To
purchase a license key, contact your authorized maintenance provider
or authorized reseller.
Show Media command to display operational information about one or
400-M5-SN-I
FINISAR CORP.
FTRJ8524P2BNL
A
P6G22RL
1Gb/s, 2Gb/s, 4Gb/s
Temp
(C)
----------- ----------- ------------ ----------- -----------
Value 37.32
Status Normal HighWarning
HighAlarm 95.00
HighWarning 90.00
LowWarning -20.00
LowAlarm -25.00
Voltage Tx Bias
(V) (mA)
3.33 7.30
Normal
3.90 17.00
3.70 14.00
2.90 2.00
2.70 1.00
S
Table 13-25 for a
Tx Pwr Rx Pwr
(mW) (mW)
0.373 0.000
Normal LowAlarm
0.637 1.264
0.637 0.791
0.082 0.028
0.073 0.019
59183-01 A