Show Port Parameters - Qlogic SANbox 9000 Series Interface Manual
Stackable chassis switch
Hide thumbs
Also See for SANbox 9000 Series:
- Interface manual (446 pages) ,
- User manual (140 pages) ,
- Brochure (15 pages)
Table of Contents
Advertisement
15 – Command Reference
Show Port
Show Port
Displays operational information for one or more ports.
Authority
None
Syntax
show port
[blade_ID]
[port_list]
all
installed
online
Keywords
[blade_ID]
Specifies the I/O blade given by [blade_ID]. [blade_ID] can be (IO0–IO7).
[port_list]
The number of the port for which to display information. [port_list] can be a set of
port numbers and ranges delimited by spaces. For example, [0 2 10-15] specifies
ports 0, 2, 10, 11, 12, 13, 14, and 15.
all
Displays information for all ports.
installed
Displays information for all ports that have transceivers installed.
online
Displays information for all ports that are online.
Notes
Table 15-32
AdminState
AIinit
AIinitError
AsicNumber
AsicPort
Bad Frames
15-154
describes the port parameters.
Table 15-32. Show Port Parameters
Entry
Administrative state
Incremented each time the port begins AL initialization.
Number of times the port entered initialization and the initial-
ization failed.
ASIC number
ASIC port number
Number of frames that have framing errors.
Description
S
59231-03 A
Advertisement
Table of Contents
