Summit X460-24T Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Chapter 1: Summit Family Switches

Summit X460-24t Switch

The front panel of the Summit X460-24t switch
Twenty-four fixed autosensing 10/100/1000BASE-T ports (ports 1–24) that provide 24 Gbps of
●
high-density copper connectivity
Eight unpopulated SFP ports (ports 21–28) that provide 8 Gbps of fiber connectivity. The SFP ports
●
support both 100BASE-FX and 1000BASE-X optical modules.
Ports 21 through 24 are implemented as shared ports that pair a copper port with a fiber port. For
more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
10/100/1000 Mbps management port
●
Serial console port used to connect a terminal and perform local management
●
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
page 103.
Stack number indicator
●
Figure 71: Summit X460-24t Switch Front Panel
10/100/1000 Mbps ports
Management port
Stack number
indicator
The rear panel of the Summit X460-24t switch
Two slots for port option cards or stacking modules (see
●
Replaceable fan tray
●
Two power supply bays for either AC or DC power supplies (see
●
Power Supplies" on page
Figure 72: Summit X460-24t Switch Rear Panel
Module slot A Module slot B
Filler panel Filler panel
96
(Figure
"Combination Ports and Failover" on page
SFP ports
Combination ports
(Figure
134)
Fan tray
Filler panel
71) includes:
"Summit X460 Series Switch LEDs" on
Console
72) includes:
Table 28 on page 95)
"Summit 300-Watt AC and DC
Two power supply
(PSU) slots
SH_188
Summit Family Switches Hardware Installation Guide
22.
port
SH_182