Summit X450A-24T Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Chapter 1: Summit Family Switches

Summit X450a-24t Switch

The front panel of the Summit X450a-24t switch
Twenty fixed autosensing 10/100/1000 BASE-T ports (ports 1–20) that provide 20 Gbps of
●
high-density copper connectivity
Four combination ports (ports 21–24) using RJ-45 connectors and SFPs to provide 4 Gbps of copper
●
or fiber connectivity
For more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
Switch LEDs" on page
Stack number indicator showing the position of this switch in a stacked configuration
●
Serial console port used to connect a terminal and perform local management
●
Figure 51: Summit X450a-24t Switch Front Panel
Stack number
indicator
The rear panel of the Summit X450a-24t switch
Slot for one of the Summit option cards listed in
●
one or two high-speed uplink ports to the switch.
Table 16: Port Option Cards for Summit X450a Series Switches
Option Card Model
XGM2-2xn option card
XGM2-2xf option card
XGM2-2sf option card
XGM2-2bt option card
Management port with associated LEDs
●
Two high-performance stacking ports with associated LEDs
●
72
(Figure
93.
10/100/1000 Mbps ports
(Figure
Type of Added Ports
10-gigabit XENPAK modules
10-gigabit XFP modules
10-gigabit SFP+ modules
Fixed 10GBASE-T copper
51) includes:
"Combination Ports and Failover" on page
"Summit X450, X450a, and X450e Series
Console
port
Combination ports
SH_018B
52) includes:
Table 16. These port option cards allow you to add
For More Information, see . . .
"Summit XGM2-2xn Option Card" on page 142
"Summit XGM2-2xf Option Card" on page 143
"Summit XGM2-2sf Option Card" on page 144
"Summit XGM2-2bt Option Card" on page 144
Summit Family Switches Hardware Installation Guide
22.