Installing An Eps-C2 Chassis - Extreme Networks Summit X150 Series Hardware Installation Manual

Installing an EPS-C2 Chassis

Figure 243: EPS-C2 Power System and Summit Switch
EPS-C2
Power Configuration Selector
2x9 Output
2x7 Output
To mount the EPS-C2 chassis in a rack:
1 Place the EPS-C2 chassis upright on a secure work surface.
2 Remove the mounting bracket kit from the packaging.
3 On each side, attach a rack mounting bracket:
a Place a rack mounting bracket over the mounting holes.
b Insert the provided screws and tighten them securely (see
Figure 244: Attaching the Mounting Bracket to the EPS-C2 Chassis
4 Slide the EPS-C2 into a 19-inch rack and secure it using appropriate rack-mount screws (see
Figure 245).
Summit Family Switches Hardware Installation Guide
ESP-C2
Summit X440-48p Switch
Installing an EPS-C2 Chassis
ESP-C2_01
Figure 244).
EPS_CS211
299