Eps-Ld External Power Supply Unit - Extreme Networks Summit X150 Series Hardware Installation Manual

EPS-LD External Power Supply Unit

You can use the Extreme Networks EPS-LD External Power Supply Unit (Model 45019) as a redundant
power supply with the following Extreme Networks switches:
Summit X450a-24t switch
●
Summit X450e-24p switch
●
When attached to the Summit X450e-24p switch, the EPS-LD provides 465 W total power with 375 W
dedicated for PoE applications.
The front of the EPS-LD has a green LED to indicate operating status
Table 37: LED Meanings on the EPS-LD
Power LED Meaning
Green, solid The external power supply is operating normally.
Off The external power supply is not connected.
NOTE
An AC power input cord is not provided; you can order an appropriate cord from Extreme Networks or
from your local supplier. The power cord must meet the requirements listed in
AC-Powered Switches and AC Power Supplies" on page
Each EPS-160 power supply is shipped with a special redundant power supply cord
Figure 98: EPS-LD Redundant Power Cord Connector
Summit Family Switches Hardware Installation Guide
(Table
"Power Cord Requirements for
464.
Collin's
ES4K027
XM_055
External Power Supplies
37)
(Figure 98).
123