Installing The Switch In A Cabinet Or Four-Post Rack - Extreme Networks Summit X150 Series Hardware Installation Manual

Chapter 6: Installing Summit Family Switches

Installing the Switch in a Cabinet or Four-Post Rack

To install the switch in a cabinet or four-post rack:
1 At the back of the cabinet, attach a rear mounting bracket to each rear post, as shown in
Figure 205: Attaching Rear Mounting Brackets—Cabinet Installation
2 Attach an ESD-preventive wrist strap to your wrist and connect the metal end to an appropriate
ground point on the rack.
3 Set the switch on a secure work surface.
4 At the front of the switch, attach a rack-mounting bracket to each side
Position the bracket with the flange at the front edge of the switch.
Figure 206: Attaching the Front Mounting Brackets—Cabinet Installation
256
SH_102
(Figure
SH_078
Summit Family Switches Hardware Installation Guide
Figure 205
206).