Installing The Switch In A Four-Post Rack - Extreme Networks Summit X150 Series Hardware Installation Manual

Chapter 6: Installing Summit Family Switches

Installing the Switch in a Four-Post Rack

To install the switch in a four-post rack:
1 At the back of the rack, attach a rear mounting bracket to each rear post, as shown in
Figure 187: Attaching Rear Mounting Brackets—Four-Post Installation
2 Attach an ESD-preventive wrist strap to your wrist and connect the metal end to an appropriate
ground point on the rack.
3 Set the switch on a secure work surface.
4 At the front of the switch, attach a rack-mounting bracket to each side as shown in
Position the bracket with the flange at the front edge of the switch.
Figure 188: Attaching a Front Mounting Bracket
240
SH_145
SH_143
Summit Family Switches Hardware Installation Guide
Figure 187.
Figure 188.