Figure 40: Summit X440-48t Switch Rear Panel
2
1 = AC power input connector
2 = Stacking ports
3 = Redundant power connector
Summit X440-48p Switch
The front panel of the Summit X440-48p switch
Forty-eight fixed autosensing 10/100/1000BASE-T PoE+ ports (ports 1–48). In addition to 48 Gbps of
●
high-density copper connectivity, these ports also provide a full 30 Watts of PoE+ per port. This
switch provides a total switch PoE power budget of 380 Watts.
Four unpopulated SFP ports (ports 45 – 48) that provide 4 Gbps of fiber connectivity. The SFP ports
●
support both 100BASE-FX and 1000BASE-X optical modules.
Ports 45 through 48 are implemented as shared ports that pair a copper port with a fiber port. For
more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
Ethernet management port
●
Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform local
●
management
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
page
65.
Stack number indicator
●
Figure 41: Summit X440-48p Switch Front Panel
1
4 5
1 = Ethernet management port
2 = 10/100/1000BASE-T PoE ports
3 = SFP ports
Summit Family Switches Hardware Installation Guide
3
(Figure
41) includes:
"Combination Ports and Failover" on page
2
4 = Stack number indicator
5 = Console port
6 = Combination ports
Summit X440 Series Switches
1
SH_277
"Summit X440 Series Switch LEDs" on
3
6
SH_274
22.
61