Summit X150-24p Switch
The front panel of the Summit X150-24p switch
Twenty-four fixed autosensing 10/100BASE-T PoE ports (ports 1–24). In addition to 4 Gbps of
●
high-density copper connectivity, these ports also provide a full 15.4 Watts of PoE per port.
Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
●
or fiber connectivity.
For more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
LEDs to indicate port status and switch operating conditions.
●
For a description of the LEDs and their operation, see
page
27.
Serial console port used to connect a terminal and perform local management.
●
Figure 3: Summit X150-24p Switch Front Panel
The rear panel of the Summit X150-24p switch includes:
Ethernet management port with associated LEDs
●
Redundant power input connector for optional connection to the EPS-500 External Power Supply
●
(Model No. 10911) with full PoE power support
The connecting redundant power supply cable is shipped with the EPS-500 unit. See
External Power Supply Unit" on page 124
AC power input socket
●
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 4: Summit X150-24p Switch Rear Panel
External power
Management port
supply connection
Summit Family Switches Hardware Installation Guide
(Figure
3) includes:
"Combination Ports and Failover" on page
10/100 Mbps ports
for more information.
Power socket
Summit X150 Series Switches
"Summit X150 Series Switch LEDs" on
Console
port
Combination ports
SH_052A
SH_053
22.
"EPS-500
25