Summit X440-24p Switch
The front panel of the Summit X440-24p switch
Twenty-four fixed autosensing 10/100/1000BASE-T PoE+ ports (ports 1–24). The Summit X440-24p
●
switch supports the PoE+ IEEE 802.3a standard and provides up to 30 Watts of power per port. This
switch provides a total switch PoE power budget of 380 Watts.
Four unpopulated SFP ports (ports 21–24) that provide 4 Gbps of fiber connectivity. The SFP ports
●
support both 100BASE-FX and 1000BASE-X optical modules.
Ports 21 through 24 are implemented as shared ports that pair a copper port with a fiber port. For
more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
Ethernet management port
●
Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform local
●
management
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
page
65.
Stack number indicator
●
Figure 33: Summit X440-24p Switch Front Panel
1
4 5
1 = Ethernet management port
2 = 10/100/1000BASE-T PoE ports
3 = SFP ports
The rear panel of the Summit X440-24p switch
Two high-performance stacking ports with associated LEDs
●
Redundant power input connector for optional connection to the EPS-C2 External Power Module
●
The connecting redundant power supply cable is shipped with the power module. See
EPS-C2 Chassis" on page 298
AC power input socket
●
The internal AC power supply operates from 100 VAC to 240 VAC.
Summit Family Switches Hardware Installation Guide
2
3
6
4 = Stack number indicator
5 = Console port
6 = Combination ports
(Figure
for more information.
(Figure
33) includes:
"Combination Ports and Failover" on page
"Summit X440 Series Switch LEDs" on
34) includes:
Summit X440 Series Switches
22.
SH_265
"Installing an
55