Extreme Networks Summit X150 Series Hardware Installation Manual page 306

Chapter 7: Installing Summit External Power Supplies
Figure 254: Attaching the Power Cord Retainer on the 750 W AC Power Supply
4 Snap the clip firmly around the connector.
5 Connect the other end of the power cord to an AC power outlet.
WARNING!
Always be sure that the source outlet is properly grounded before plugging the AC power cord into the
AC power supply.
CAUTION
Make sure that the AC power supply circuit is not overloaded. Use proper over-current protection, such as
a circuit-breaker, to prevent over-current conditions.
306
ESP-C2 07
Summit Family Switches Hardware Installation Guide