Summary Of Conditions For Alternate Stacking Ports - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit x150/x250e/x350/x440/x450/x450a/x450e/x460/x480/x650/x670 series
Hide thumbs Also See for Summit X150 Series:
Table of Contents

Advertisement

Table 60: Alternate Stacking Ports (Continued)
Switch Model
Summit X480-48t
Summit X480-48x
Summit X650-24t
Summit X650-24x
Summit X670-48x
Summit X670V-48x

Summary of Conditions for Alternate Stacking Ports

Alternate stacking ports must be 10-Gbps Ethernet ports. In addition, specific switch models have the
requirements listed in this section.
Summit X440 series switches:
When ports 25 and 26 or 49 and 50 are used as alternate stacking ports, those ports are not available to
use as data ports.
Summit X450a and X450e series switches:
To use the SummitStack-V feature, you must install one of the following port option cards to add
10-Gbps ports to the switch.
XGM2-2xf option card
XGM2-2xn option card
XGM2-2sf option card
XGM2-2bt option card
Summit X460 Series Switches:
To use the SummitStack-V feature, you must install an XGM3-2sf, XGM3S-2sf, or XGM3S-2xf port
option card to add 10-Gbps ports to the switch.
Summit X480 series switches:
Summit X480-48t and X480-48x switches do not have 10-Gbps ports on the base model switch. To use
the SummitStack-V feature on these switches, you must install either a VIM2-10G4X module (ports
S3 (51) and S4 (52) can then be configured as alternate stacking ports). Alternate stacking ports are
not supported with the VIM3-40G4X.
Summit Family Switches Hardware Installation Guide
Type or location of Native
Stacking Ports
None (VIM has only data ports)
NOTE: The Summit X480-48t or X480-48x switch must have an installed VIM2-10G4X
to configure alternate stacking ports. Alternate stacking ports are not supported with
the VIM3-40G4X.
None (VIM has only data ports)
VIM1-SummitStack or
VIM1-SummitStack256 module.
VIM3-40Gx module (S3, S4)
None (VIM has only data ports)
VIM1-SummitStack or
VIM1-SummitStack256 module
VIM3-40Gx module (S3, S4)
None
VIM4-40G4X module
NOTE: Ports 45 and 46 are not available as data ports when the alternate stacking
ports are used.
Using the SummitStack-V Feature
Alternate
Alternate
Stacking
Stacking
Location of Alternate
Port 1
Port 2
Stacking Ports
S3 (51)
S4 (52)
VIM2-10G4X module
31
32
VIM1-10G8X module
23
24
Front panel
23
24
Front panel
31
32
VIM1-10G8X module
24
23
Front panel
23
24
Front panel
47
48
Front panel
47
48
Front panel
183

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents