Summit X670-48X Switch - Extreme Networks Summit X150 Series Hardware Installation Manual

Summit X670-48x Switch

The front panel of the Summit X670-48x switch
Forty-eight unpopulated optical ports that can accommodate 10GBASE-X SFP+ or 1000BASE-X SFP
●
optical modules to provide high-density fiber connectivity
For information about SFP+ and SFP optical modules, see the Extreme Networks Pluggable Interface
Modules Installation Guide.
10/100/1000-Mbps management port
●
Serial console port used to connect a terminal and perform local management
●
USB port for access to external storage
●
Motion sensor
●
Grounding stud
●
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
page 117.
Stack number indicator
●
Figure 93: Summit X670-48x Front Panel
Management and Console ports
Stack number
indicator
The rear panel of the Summit X670-48x switch
Three replaceable fan modules
●
Two power supply bays for either AC or DC power supplies (see
●
Power Supplies" and
Figure 94: Summit X670-48x Rear Panel
Summit Family Switches Hardware Installation Guide
(Figure
SFP+ ports
(Figure
"Summit 550-Watt AC and DC Power Supplies" on page
Fan trays
Summit X670 Series Switches
93) includes:
"Summit X670 Series Switch LEDs" on
USB
port
94) includes:
"Summit 450-Watt AC and DC
Two power supply
(PSU) slots
SH_243
Motion
sensor
Grounding
stud
135)
115