Chapter 1: Summit Family Switches
Summit X250e-24p Switch
The front panel of the Summit X250e-24p switch
Twenty-four fixed autosensing 10/100BASE-T PoE ports (ports 1–24). In addition to 2.4 Gbps of
●
high-density copper connectivity, these ports also provide a full 15.4 Watts of PoE per port.
Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
●
or fiber connectivity
For more information about combination ports, see
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
LEDs to indicate port status and switch operating conditions
●
For a description of the LEDs and their operation, see
page
42.
Stack number indicator showing the position of this switch in a stacked configuration
●
Serial console port used to connect a terminal and perform local management
●
Figure 11: Summit X250e-24p Switch Front Panel
Stack
1
2
Stack number indicator
The rear panel of the Summit X250e-24p switch
Ethernet management port with associated LEDs
●
Two high-performance stacking ports with associated LEDs
●
Redundant power input connector for use with the EPS-500 External Power Supply
●
(Model No. 10911) with full PoE power support
The connecting redundant power supply cable is shipped with the EPS-500 unit. See
External Power Supply Unit" on page 124
AC power input socket
●
The internal AC power supply operates from 100 VAC to 240 VAC.
32
(Figure
"Combination Ports and Failover" on page
10/100 Mbps ports
(Figure
12) includes:
for more information.
11) includes:
"Summit X250e Series Switch LEDs" on
Console
port
Combination ports
SH_040B
Summit Family Switches Hardware Installation Guide
22.
"EPS-500