Table of Contents
Advertisement
Section 1: Automation EQ
Additional EQ
Automation
Features
Automation Viewer
Pass 1
F1
Clr?
F1
Monitor Before Record
(MBR)
1 - 2
By using the Pass Control screen, the A, B, C and D rows are assignable, via
menu selection, to display several EQ automation parameters and their
automation moves. The display is similar in style to auxes, pans and faders.
They can also show combinations of EQ and Aux moves if desired.
Press [Pass Ctrl] to view the Pass Control screen. Press [F4] (down arrows),
[F4] (Util), [F1] (View) and then [F3] (Show):
In this menu, each row can be configured individually or all four rows can be
Undo?
Redo?
F2
F3
F4
Pack?
Edit
Util
F2
F3
F4
Set:EQ1
F1
configured simultaneously by recalling "Sets".
In Set mode (Set:EQ1 in our example), [F3]/[F4], the [+]/[-] keys and the
SpinKnob select the set for the four rows. Remember, a "Set" is a preset that
configures all four rows . Press [F1] to toggle between Row and Set modes:
In Row mode, [F2] selects the row to be configured. [F3]/[F4], the [+]/[-] keys
Row 1:
and the SpinKnob allow selection of the parameter to be viewed in the row.
The Monitor Before Record (MBR) automation feature applies to automated EQ
(see the Automation Editing section later in this document for a discussion of
MBR).
EQ moves are in Absolute only and the Win, Wout and Wthru applies to EQ.
Euphonix CS3000/2000 MixView 3.0 Software Supplement
View
Join
F1
Zoom
Full
F1
LG / lG / hG / HG
F2
F3
F4
EQ1
F1
F2
F3
Group
Trim
F2
F3
F4
Show
ZFac
F2
F3
F4
lG
F4
Advertisement
Table of Contents
