Mono Pan Center Locked Mode; Mono Mode; Exercise 4; Stereo Balance Mode - Euphonix MixView CS3000 Software Manual

Mono Pan Center
Locked Mode

Mono mode

SIDE NOTE:
This mode is rarely used and
should not be confused with the
similarly displayed Mono
Independent mode.

Exercise 4

Stereo Balance mode

Euphonix CS3000/2000 MixView 3.0 Software Supplement
There are some additional mono-in variations which bear mentioning at this
time. From the Aux Status menu, press [F3] to lock the pan control signal at
the center:
16AB->
F1
An additional mode is accessible from this Level/Pan Mode menu. This Mono
mode sums all inputs and outputs, disables the upper control of the A/B and
C/D aux sends and is included here only for backward title compatibility with
earlier versions of software.
Press [F2] to select Mono mode:
16AB->
F1
In this exercise, we will setup channel 16's aux send A & B as a stereo in/
stereo out level and pan feed.
Press channel 16's aux A/B block attention key to display the Aux Status menu
and confirm that console attention is directed to aux send A:
16A->
F1
Press the [*ST] key followed by [F3] (Yes) to change to stereo linked mode:
AB Stereo Aux ? Yes
F1
16AB->
F1
The most commonly used stereo mode is Stereo Balance mode.
Section 7: Channel Function Enhancements
MnPan Ctr
F2 F3
Mono - - -
F2 F3
ON pre
F2 F3
F2 F3
*
Stereo Bal
F2 F3
Ind?
F4
Ind?
F4
F4
[No]
F4
Ind?
F4
7 - 53