Section 11 : Miscellaneous; Overview; Locate Menu System - Euphonix MixView CS3000 Software Manual

SECTION 11 : MISCELLANEOUS

Overview

Locate Menu
System
7 8 9
4 5 6
1 2 3
Euphonix CS3000/2000 MixView 3.0 Software Supplement
I
n order to make it easier to locate to a specific place within your program,
v3.0 adds a new SmartDisplay Locate menu.
The Locate menu is accessed by pressing the DSC Transport Control [Loc] key.
When first pressed, the Cue List is no longer automatically displayed on the
DSC screen. Instead the SmartDisplay menu allows the user to enter a time-
code position or a Cue Number:
Locate Menu
F1
To locate to a specific timecode address, type in the numbers using the DSC
Numeric keypad. Type in the TC address in hrs:mins:secs.frames as the
address field is filled from right to left. If you make a mistake, you can use the
[Del] key as a backspace key. It is not necessary to type leading zeros and it is
no longer necessary to use the *ST key to enter frames. As an exercise, type
in 7 minutes, 35 seconds and 20 frames:
F1
Press [Enter] to locate to the new address:
Once a position has been located using the Enter key, the timecode position is
remembered so that pressing the [Loc] key twice at any time locates to the
last recalled position.
00:00:00.00 Mark
F2 F3
00:00:07.35 Mark
TC address field fills from right to left
00:07:35.20 Mark
F2 F3
Section 11: Miscellaneous
Cue
F4
Cue
Cue
F4
11 - 73