Display Stack Port Statistics; Display Stack Member Counters - Dell S4048T Configuration Manual

txPkt(COS1 ) :0
txPkt(COS2 ) :0
txPkt(COS3 ) :0
txPkt(COS4 ) :0
txPkt(COS5 ) :0
txPkt(COS6 ) :0
txPkt(COS7 ) :0
txPkt(COS8 ) :0
txPkt(COS9 ) :0
txPkt(COS10) :0
txPkt(COS11) :0
txPkt(UNIT0) :0
Example of Viewing Party Bus Statistics
Dell#sh hardware stack-unit 1 cpu party-bus statistics
Input Statistics:
27550 packets, 2559298 bytes
0 dropped, 0 errors
Output Statistics:
1649566 packets, 1935316203 bytes
0 errors

Display Stack Port Statistics

The show hardware stack-unit stack-port command displays input and output statistics for a stack-
port interface.
Example of Viewing Stack Unit Statistics
Dell#show hardware stack-unit 2 stack-port 49
Input Statistics:
27629 packets, 3411731 bytes
0 64-byte pkts, 27271 over 64-byte pkts, 207 over 127-byte pkts
17 over 255-byte pkts, 56 over 511-byte pkts, 78 over 1023-byte pkts
0 Multicasts, 5 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
Output Statistics:
1649714 packets, 1948622676 bytes, 0 underruns
0 64-byte pkts, 27234 over 64-byte pkts, 107970 over 127-byte pkts
34 over 255-byte pkts, 504838 over 511-byte pkts, 1009638 over 1023-byte pkts
0 Multicasts, 0 Broadcasts, 1649714 Unicasts
0 throttles, 0 discarded, 0 collisions
Rate info (interval 45 seconds):
Input 00.00 Mbits/sec,
Output 00.06 Mbits/sec,
Dell#

Display Stack Member Counters

You can use the show hardware command to display internal receive and transmit statistics, based on the
selected command option.
The following example is a sample of the output for the counters option.
Example of Displaying Counter Values for all Interface in the Selected Stack-Member and Port-Pipe
Dell# show hardware stack-unit 1 unit 0 counters
Interface Te 0/0 :
2 packets/sec, 0.00% of line-rate
8 packets/sec, 0.00% of line-rate
Debugging and Diagnostics 1257