Preface; About This Document; Document Conventions - Intergraph TD-x10 Setup Manual

Preface

TD-x10, TDZ-x1x, TDZ-612 RAX System Setup describes setting up and configuring your
TD-x10, TDZ-x1x, or TDZ-612 RAX workstation for use. This document also provides
information on operating the system and re-installing system software.

About This Document

TD-x10, TDZ-x1x, TDZ-612 RAX System Setup is organized as follows:
u
Chapter 1, "Setting Up the Hardware," describes how to set up and start the system
hardware.
u
Chapter 2, "Setting Up the Software," describes how to set up the system software.
u
Chapter 3, "Configuring the System," describes how to configure the system for use.
u
Chapter 4, "Configuring the BIOS," describes how to use AMIBIOS Setup to configure
the system's Basic Input/Output System (BIOS).
u
Chapter 5, "Troubleshooting," describes how to resolve common system problems.
u
Chapter 6, "Installing System Software," describes how to install the operating system
and associated system software, if required.

Document Conventions

Bold
Italic
Monospace
SMALL CAPS
+
CTRL D
Commands, words, or characters that you key in literally.
Variable values that you supply, or cross-references.
Output displayed on the screen.
Key names on the keyboard, such as
directories. You can type filenames and directory names in the dialog boxes
or the command line in lowercase unless directed otherwise.
Press a key while simultaneously pressing another key; for example, press
and simultaneously.
CTRL D
, or 3; names of files and
D ALT F
vii