Intergraph TD-x10 Setup Manual page 27

Hide thumbs Also See for TD-x10:
Table of Contents

Advertisement

u
Computer name for your system:
u
Workgroup name (if the system will be
part of a workgroup):
u
Domain name (if the system will be part
of a Windows NT domain):
If the system is connected to a network that uses the Transmission Control Protocol/Internet
Protocol (TCP/IP), obtain and record the following TCP/IP networking information from your
network administrator:
u
Internet Protocol (IP) address for your
system:
u
IP subnet mask for your system:
u
IP domain name for your network:
u
IP address for your network's default
gateway:
u
IP addresses for your network's
Domain Name System (DNS) servers,
if any:
u
IP addresses for your network's
Windows Internet Name Service
(WINS) servers, if any:
Have several blank, formatted diskettes available to create backup diskettes containing system
software.
The Windows NT delivery media contain software and drivers for both Reduced Instruction
Set Computing (RISC)- and Intel-based systems. When installing Windows NT distribution
files, make sure to install them from the \I386 directory (the Intel software directory) on the
delivery media. For example, if you are installing a device driver from the Windows NT
CD-ROM, key in the following when asked for the path to the file, where drive is the drive
letter for the CD-ROM drive:
drive:\i386
15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TD-x10 and is the answer not in the manual?

This manual is also suitable for:

Tdz-x1xTdz-612 rax

Table of Contents