Preparing For Setup - Intergraph TD-x10 Setup Manual

14

Preparing for Setup

The system shipped with the operating system and associated system software installed on the
system's hard disk. Intergraph installed the following system software:
u
Windows NT network software (TCP/IP and NetBEUI).
u
Windows NT 4 Service Pack 3 software
u
Driver software for the on-board SCSI adapter.
u
Driver software for the on-board networking adapter.
u
Driver software for the installed video display adapter.
u
Driver software for the on-board sound processor.
u
Driver and utility software for the installed RAID controller (on a TDZ-610 system with
an internal RAID disk array).
u
Quick-Fix Engineering (QFE) update software -- fixes for operating system problems or
limitations on your Intergraph hardware or software (if needed).
u
The default File Allocation Table (FAT) file system.
The first time you start the system, it boots to a Setup screen or a logon dialog for the
operating system. If your system boots to a Setup screen, you follow the Setup process to
prepare the operating system for use.
Before you go through Setup, have the following documentation available:
u
Microsoft's Start Here.
u
Documentation for the video display adapter delivered with the system.
Obtain and record the following information:
u
Your name, and the name of your
company or organization:
u
The CD Key from the Windows NT
Workstation, the CD key from the
Windows NT Workstation CD case, or
the Product Identification Number from
the Installation Guide or Start Here:
u
A username for setting up a user
account.
If the system is connected to a network, obtain and record the following networking
information from your network administrator: