Subscribe to Our Youtube Channel
Related Manuals for Intergraph TD-200 Targa 2000
Summary of Contents for Intergraph TD-200 Targa 2000
- Page 1 TD-200 Targa 2000 Configuration Guide for Value-Added Resellers March 1997 DSA082900...
- Page 2 This document may not, in whole or in part, be reproduced in any form or by any means, or be used to make any derivative work, without written consent from Intergraph Corporation. Intergraph Corporation, Huntsville, AL 35894-0001 205-730-2000...
-
Page 3: Table Of Contents
Document Conventions....................v Finding Additional Information ..................v Getting Documentation and Training ................vi Getting Telephone Support ..................vii Using the Intergraph Bulletin Board Service ..............vii Using the Intergraph FAXLink ...................viii Finding Intergraph on the Internet ................viii 1 Getting Started ......................1 Setting Up System Hardware and Software.............. -
Page 5: Preface
Press a key while simultaneously pressing another key; for example, press CTRL simultaneously. CTRL Finding Additional Information For information on setting up, configuring, and using the Intergraph TD-200 system, refer to the printed and online documentation delivered with the system. -
Page 6: Getting Documentation And Training
Outside the United States, contact the Intergraph subsidiary or distributor from which you purchased your Intergraph product to place an order. To find information on training for Intergraph products, or to enroll for an available class, contact Intergraph Training Solutions at 1-800-240-3000. -
Page 7: Getting Telephone Support
Using the Intergraph Bulletin Board Service Available 24 hours a day, 7 days a week, the Intergraph Bulletin Board Service (IBBS) is an electronic forum for Intergraph customers to exchange information with Intergraph's technical and marketing staff, and with other Intergraph customers. You can use the IBBS to get technical support information, documentation and training information, programs, and software updates and fixes. -
Page 8: Using The Intergraph Faxlink
System Operator (Sysop) at 1-205-730-1413. Using the Intergraph FAXLink You can use the Intergraph FAXLink to get technical support information by fax 24 hours a day, 7 days a week. From a touch-tone phone or fax machine phone: Call 1-800-240-4300 to get new user instructions, an index listing of available documents, and an overview of the categories of available information. -
Page 9: Getting Started
The ICU program is part of the System Utilities (SYSUTIL) product for the TD-200. If you do not have the ICU program, you can get the latest version from the Intergraph Bulletin Board Service (IBBS). Refer to the hardware documentation delivered with the TD-200 for... -
Page 10: Taking Antistatic Precautions
Taking Antistatic Precautions You will be opening the system to remove and install expansion boards. Some components in a system can be damaged by static electricity. To minimize the possibility of damage, take the following steps: Turn off power to the system. Leave the power cord connected to the system and to the AC outlet to maintain ground. -
Page 11: Configuring The System
2 Configuring the System Follow the instructions in this chapter to configure an Intergraph TD-200 system to use a Targa 2000 board. CAUTION Follow these instructions in the order in which they are presented. These instructions assume the following: The system has an installed Peripheral Component Interconnect (PCI) video display adapter, Small Computer System Interface (SCSI) adapter, and network adapter. -
Page 12: Verify The Current Irq Settings
Verify the Current IRQ Settings To verify the current IRQ settings: 1. Turn on power to the system, let the system start, and log on to Windows NT using an account with Administrator privileges. 2. From the Start menu, select Programs/Administration Tools/Windows NT Diagnostics to open the Windows NT Diagnostics dialog. -
Page 13: Disable On-Board Audio And Free Irq Settings
If the system has an installed ISA network adapter, read the information in “Add Networking” in this chapter before proceeding. Disable On-board Audio and Free IRQ Settings To disable on-board audio and free IRQ settings: 1. Turn on power to the system. 2. -
Page 14: Free Audio Irq Settings
6. Select OK. 7. When asked if you want to restart the system, select No. 8. In the Control Panel, open Multimedia to display the Multimedia dialog. 9. Select Devices (tab) and select Audio Devices; then highlight and remove any devices under Audio Devices. -
Page 15: Install The Targa 2000 Board
3. As the system boots, when prompted, press 1 to start the BIOS Setup program. 4. Under Advanced/Plug and Play Configuration, set the SCSI adapter IRQ settings to Available. For example, for a dual-channel SCSI adapter, set both IRQ 9 and IRQ 10 (and/or multi-channel SCSI) to Available. -
Page 16: Add Networking
7. Turn on power to the system, let the system start, and log on to Windows NT using an account with Administrator privileges. 8. Install the Targa 2000 driver software according to the manufacturer’s instructions. 9. Restart the system, and log on to Windows NT using an account with Administrator privileges. -
Page 17: Create A Disk Drive Stripe Set
Create a Disk Drive Stripe Set To ensure optimal performance, you should create a stripe set that includes all of the disk drives in the system. Creating a stripe set splits the data from a single file or database onto several disk drives, permitting multiple simultaneous accesses to the data. - Page 18 You may have to take these actions because of the system resources required by an ATA-type PC Card hard disk or a PC Card modem. To disable the parallel port, USB ports, or serial ports: 1. Shut down Windows NT, and turn off power to the system. 2.
Need help?
Do you have a question about the TD-200 Targa 2000 and is the answer not in the manual?
Questions and answers