Table of Contents
Advertisement
Restart the system and select the non-VGA version of the appropriate operating system to use
the reconfigured video display driver. If problems persist, contact the Intergraph Customer
Response Center for help.
Configuring Networking
The system is equipped with an on-board Ethernet network adapter. Before you configure
networking, ensure that the system is connected to the network.
To configure Networking, open Network in the Control Panel. Follow the instructions in the
dialogs to set up the system to use a network. Be sure to set up the appropriate network
protocols, such as TCP/IP and NetBEUI, for the network to which the system is connected.
Refer to the operating system documentation and Help for detailed information on setting up
the operating system to use a network.
Configuring the Sound Driver
The system is equipped with an on-board sound processor whose driver was pre-configured.
If the system has a multimedia keyboard or a microphone and speakers, you can use the
operating system's sound control programs to control them.
Refer to the operating system documentation and Help for information on using the sound
control programs.
Configuring Free Disk Space
If the system is equipped with an internal system disk drive larger than 2 GB, it was
configured at the factory with a 2 GB system partition. The remainder of the space on the
drive is left raw. Before you can gain access to and use the raw space, you must format it
using the Windows NT Disk Administrator. Refer to the operating system documentation and
Help for more information.
If the system is equipped with a RAID disk array, use the Windows NT Disk Administrator to
configure and format free space on the RAID system drive. If you have additional RAID hard
disk drives, initialize and configure them using the DAC Configuration utility. Then use Disk
Administrator to configure and format the free space on the additional RAID disk drives.
Refer to the InterRAID documentation delivered with the system for more information.
29
Advertisement
Table of Contents
Need help?
Do you have a question about the TD-x10 and is the answer not in the manual?
Questions and answers