Related Manuals for Intergraph TD-2x
Summary of Contents for Intergraph TD-2x
- Page 1 TD-2x, TD-22x Late-Breaking News June 1998 DHA0209H0...
- Page 2 Notice Information in this document is subject to change without notice and should not be considered a commitment by Intergraph Computer Systems. Intergraph Computer Systems shall not be liable for technical or editorial errors in, or omissions from, this document.
- Page 3 General Default Disk Drive Formatting and Partitioning Your system’s primary system disk drive and any additional disk drives were formatted and partitioned before shipment. In Explorer or My Computer, you can right-click a disk drive and click Properties to display the drive’s partition size and file system format. To view partition and format information for all disk drives, you can use Disk Administrator on a Windows NT system or the fdisk command on a Windows 95 system.
- Page 4 FLASHUTIL FLASHUTIL the Support pages on the World Wide Web (http://www.intergraph.com/ics/) or from the Intergraph Bulletin Board Service (1-256-730-8786). 333 MHz Processor Support (TD-225) A TD-225 must be running BIOS version 02.08 or higher to support a 333 MHz Pentium II processor.
-
Page 5: Windows Nt
Enabling PC Card Hard Disk Operation Intergraph Computer Systems has found a resource conflict that keeps a PC Card hard disk (ATA or AT type) from being configured by Windows NT 4.0. To enable operation of a PC Card hard disk in a PC Card adapter, you must edit the Windows NT Registry. - Page 6 In the Data box, type F347. Under Radix, select Hex; then select OK. Exit from the Registry Editor. Restart the system. 10. Restart the system. Default Ensoniq Mixer Settings If you need to return the Ensoniq mixer software to its default settings (for example, after reinstalling Windows NT), refer to the following illustration: Use these default mixer settings as a starting point to ensure proper system audio operation.
-
Page 7: Installing 3Com Network Adapter Driver Software
Windows 95 Installing 3Com Network Adapter Driver Software If your system includes a 3Com network adapter, the driver software is not preinstalled. The first time Windows 95 starts, it detects the 3Com network adapter and prompts you for the driver software. Install the driver software from the 3 diskette, which is delivered as backup media in InterSite Version Manager or in the 3Com network adapter kit. - Page 8 Internet Explorer 4.01. These settings include links that give you quick access to Intergraph Computer Systems sites on the World Wide Web. To use the product: SETTINGS...
- Page 9 To use a PC Card device with a system in the described configuration, shut down the system, insert the PC Card device in the PC Card adapter, and then restart the system. Once the system has restarted, you can remove and reinsert the PC Card device as needed. Default Ensoniq Mixer Settings If you need to return the Ensoniq mixer software to its default settings (for example, after reinstalling Windows 95), refer to the following illustration:...
- Page 10 While installing the driver, you are asked to insert Windows 95 Disk 1. The driver’s Setup program is looking for the driver diskette delivered with the adapter. Make sure the diskette is in the floppy disk drive, type the path to the diskette (typically a:\), and then click OK. While installing the driver, you are asked to insert Windows 95 Disk 2.
Need help?
Do you have a question about the TD-2x and is the answer not in the manual?
Questions and answers