Sound; Video - Intergraph TD-x10 Setup Manual

54

Sound

ERROR - Sound cannot be heard.
Reason
The external speakers are powered off.
Volume control on speakers or keyboard is
too low.
Speaker cables are not properly connected.
The Volume Control application has the
volume off.
Headphones are plugged into the keyboard.

Video

ERROR - System powered on, but screen remains blank.
Reason
Monitor not powered on.
Monitor power cord not connected.
Video cable not properly installed.
Graphics card disconnected from riser card
socket.
Selected resolution is not supported by the
monitor.
Improper graphics driver installed.
Solution
Power on the speakers.
Adjust volume up.
Verify cables are properly connected.
Run the Volume Control application and
increase the master volume.
Unplug the headphones.
Solution
Turn on power to the monitor.
Connect monitor power cord to AC outlet
and monitor.
Ensure video cable is connected to monitor
and base unit.
Open base unit and re-seat graphics card.
Refer to the System Reference.
Select a supported resolution. Refer to the
video display adapter documentation and
. file for resolution details.
README TXT
Remove the driver and install a valid driver.
Refer to Chapter 3.