Going Through Setup - Intergraph TD-x10 Setup Manual

16

Going Through Setup

The first time you start the system, it boots to a Microsoft End User License Agreement
(EULA) screen for the operating system. After reviewing and agreeing to the terms of the
agreement, follow the instructions provided on-screen to continue Setup. Take the default
settings provided by Setup, except as noted in the following text. You can set up a user
account and join a workgroup or domain after you configure the video display, the sound
processor, and networking.
u
Allow Setup to configure the network only if you have an installed network adapter, and
the system is connected to the network.
u
When prompted to create an Emergency Repair Disk, do so.
u
If you do not set up a user account during Setup, press
dialog to log on to the operating system.
u
The system's hard disk drive contains Windows NT Setup files in the
When installing network or video display adapter drivers, you can refer to the i
directory when prompted for the location of Windows NT Setup files. If you delete the
i directory from the system's hard disk, you must have access to a Windows NT
386
CD-ROM to use Windows NT Setup files.
For more information on Setup, and on using the interface features of the operating system,
refer to the operating system documentation and Help.
or select OK at the logon
ENTER
:\i directory.
C 386
386