Preface
The TD-300, TD-400 Desktop Setup and Maintenance Guide contains
information for setting up, configuring, and servicing your desktop
workstation.
About This Document
The TD-300, TD-400 Desktop Setup and Maintenance Guide is organized as
follows:
Chapter 1, "Getting Started," describes how to set up the system
hardware and start the system, and other system information.
Chapter 2, "Configuring the System," describes how to configure the
video display and the TCP/IP networking software, and how to perform
any additional configuration tasks.
Chapter 3, "Opening and Closing the Base Unit," describes how to open
and close the system for maintenance and upgrades.
Chapter 4, "Maintaining the System," describes how to maintain the
system and replace its major components, and how to reprogram the
system's flash EPROM.
Chapter 5, "Upgrading the System," describes how to upgrade the
system with new components.
Chapter 6, "Using AMBIOS Setup," describes how to configure the
system's Basic Input/Output System (BIOS).
Chapter 7, "Troubleshooting," describes how to resolve common system
problems.
ix
Need help?
Do you have a question about the TD-300 and is the answer not in the manual?