Adjust Hard Disk Drive And Virtual Memory Settings; Install Raid Software; Disable Command Queuing - Intergraph TD-x10 Setup Manual

Hide thumbs Also See for TD-x10:
Table of Contents

Advertisement

60
delete the
I
Workstation CD-ROM to use Windows NT Workstation Setup files.
Adjust Hard Disk Drive and Virtual Memory
Settings
If you have more than one hard disk drive, you may need to reassign system drive letters and
the location of the virtual memory page file. Use Disk Administrator to reassign system drive
letters, as described in the operating system documentation and online help.
NOTE
If you reassign the current drive or an otherwise locked drive, you must restart the system
after exiting Disk Administrator to complete the drive reassignment.
After you reassign drive letters, use the Performance tab of the System dialog (in the Control
Panel) to check the location of your virtual memory page file, and to reassign it or create
additional ones if necessary. For more information, refer to the operating system
documentation and online help.

Install RAID Software

If the system is equipped with an InterRAID disk array, you must install the RAID software,
which may include a driver and RAID administration utilities. Refer to the InterRAID
documentation delivered with the system for instructions.

Disable Command Queuing

To improve standalone system performance and to improve performance with some high-
performance SCSI peripherals, you should disable command queuing in the Windows NT
Registry.
WARNING
Do not change values in the Registry other than as directed. If you introduce incorrect
values into the Registry, you may cause serious operating system problems, and you
may have to re-install Windows NT. If you change values in the Registry that make your
system unusable, you may be able to restart the system and use the Last Known Good
Configuration option to undo the damage. Refer to the operating system
documentation for more information on the Last Known Good Configuration option.
To disable command queuing:
386 directory from the system's hard disk, you must have access to a Windows NT

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TD-x10 and is the answer not in the manual?

This manual is also suitable for:

Tdz-x1xTdz-612 rax

Table of Contents