Going Through Setup - Intergraph TD-20 Setup Manual

Have several blank, formatted diskettes available to create backup diskettes containing system
software.
The Windows NT delivery media contain software and drivers for both Reduced Instruction
Set Computing (RISC)- and Intel-based systems. When installing Windows NT distribution
files, make sure to install them from the \
delivery media. For example, if you are installing a device driver from the Windows NT
CD-ROM, key in the following when asked for the path to the file, where drive is the drive
letter for the CD-ROM drive:
drive:\i386

Going Through Setup

On a system running Windows NT Workstation 4.0 or Windows 95, the first time you start the
system, it boots to a Setup screen. Select Next to start Setup, and follow the instructions
provided on-screen to complete the process. Take the default settings provided by Setup,
except as noted in the following text. You can set up a user account and join a workgroup or
domain after you configure the video display, the sound processor, and networking.
On a system running Windows NT Workstation 4.0 or Windows 95:
u
Allow Setup to configure the network only if you have an installed network adapter, and
the system is connected to the network.
u
When prompted to create an Emergency Repair Disk (Windows NT Workstation) or a
Startup Diskette (Windows 95), do so.
u
If you do not set up a user account during Setup, press
dialog to log on to the operating system.
On a system running Windows NT Workstation 4.0:
u
The system's hard disk drive contains Windows NT Workstation Setup files in the
directory. When installing network or video display adapter drivers, you can refer to the
386 directory when prompted for the location of Windows NT Workstation Setup files.
I
If you delete the
Windows NT Workstation CD-ROM to use Windows NT Workstation Setup files.
386 directory (the Intel software directory) on the
I
386 directory from the system's hard disk, you must have access to a
I
or select OK at the logon
ENTER
9
:\ 386
C I