Going Through Operating System Setup - Intergraph TD-22x System Manual

12
Have several blank, formatted diskettes available to create backup diskettes containing
system software.
The Windows NT delivery media contain software and drivers for both Reduced Instruction
Set Computing (RISC)- and Intel-based systems. When installing Windows NT distribution
files, make sure to install them from the \i
delivery media. For example, if you are installing a device driver from the Windows NT
CD-ROM, key in the following when asked for the path to the file, where drive is the drive
letter for the CD-ROM drive:
drive:\i
386

Going Through Operating System Setup

The first time you start the system, it boots to an End-User License Agreement screen. After
reviewing and accepting the terms of the agreement, follow the instructions to continue
operating system Setup. Take the default settings provided by Setup, except as noted in the
following text. You can set up a user account and join a workgroup or domain after you
configure the video display, the sound processor, and networking.
On a system running Windows NT or Windows 95:
u
Allow Setup to configure the network only if the system has an installed network
adapter, and only if the system is connected to the network.
u
When prompted to create an Emergency Repair Disk (Windows NT) or a Startup
diskette (Windows 95), do so.
u
If you do not set up a user account during Setup, press
dialog to log on to the operating system.
On a system running Windows NT:
u
On a system shipped from the factory without a CD-ROM drive, the system's hard disk
drive contains Windows NT Setup files in the
network or video display adapter drivers, you can see the i
for the location of Windows NT Setup files. If you delete the i
system's hard disk, you must have access to a Windows NT CD-ROM to use Windows
NT Setup files.
On a system running Windows 95:
u
While Windows 95 files are being copied to the system, you are prompted for the
Windows 95 Setup boot diskette. This occurs even if the Windows 95 Setup boot
diskette is already inserted in the floppy disk drive. Select OK to continue.
directory (the Intel software directory) on the
386
ENTER
:\i directory. When installing
C 386
386
or select OK at the logon
directory when prompted
directory from the
386