About This Document - Intergraph TD-22x System Manual

x
u
Two 16550 Universal Asynchronous Receiver/Transmitter (UART) serial ports
u
Two Universal Serial Bus (USB) ports
u
Expansion slots:
Three PCI, three ISA, and one shared in the TD-22, TD-25, and TD-220
Four PCI, two ISA, and one shared in the TD-225
u
EIDE CD-ROM drive
u
PCI wavetable sound board
u
Windows 95-ready standard keyboard or optional multimedia keyboard
u
Optional internal PC Card adapter for Type I, Type II, or Type III PCMCIA devices
u
Optional Ultra/Wide SCSI (SCSI-3) adapter
u
Optional PCI and ISA network adapters
u
Optional microphone and speaker set
u
Optional internal 33.6 Kbps modem
u
Optional SCSI CD Recorder
u
Optional internal tape
u
Optional internal Zip drive

About This Document

TD-2x, TD-22x System Guide is organized as follows:
u
Chapter 1, "Setting Up the Hardware," describes how to set up the system hardware.
u
Chapter 2, "Setting Up the Software," describes how to set up the operating system and
associated system software.
u
Chapter 3, "Configuring the System," describes how to configure the system for use.
u
Chapter 4, "Operating Notes," provides information on operating the system.
u
Chapter 5, "Installing System Software," provides information you will need if you must
reinstall the operating system and associated system software.
u
Chapter 6, "Expanding the System," provides information on expanding the system by
adding external and internal peripheral devices, expansion cards, and system memory.
u
Chapter 7, "Using System Resources," provides information on using system resources,
such as interrupt requests (IRQs) and basic input/output system (BIOS) parameter
settings.