Intergraph TD-22x System Manual page 39

8. When prompted, press
9. If you want to save the current BIOS, select Save Flash Memory Area To a File and
press . Otherwise, go to step 15.
ENTER
10. Insert an empty, formatted diskette into the floppy disk drive.
11. Select Save System BIOS and press
12. When prompted to enter a path to the file, type a:\save.bio and press
13. When prompted to enter the Flash Data Image title, type save and press
14. From the main menu, select Update Flash Memory From a File and press
15. Select Update System BIOS and press
16. When prompted to enter a path to the file, press
the up/down arrow keys to select drive [-A-], and then press
the BIOS version (for example, 1011CS1_.BIO), and then press
17. When prompted that the BIOS is about to be changed, press
18. After the BIOS has been successfully updated, remove the diskette from the floppy disk
drive. Label the diskette BIOS Update date and Previous BIOS filename, where date is
today's date and filename is the filename you entered in step 12 above
19. Press to restart the system. As the system boots, turn off power to the system;
ENTER
then turn on power to the system again.
20. As the system boots, make sure that the BIOS version displayed is the new version; then
press to enter BIOS Setup.
DELETE
21. In BIOS Setup, press
do not do this, the system may not function correctly with the new BIOS.
22. Reenter the parameter settings you recorded before you updated the BIOS.
23. After reentering the parameter settings, make sure that they match the settings you
recorded before you updated the BIOS.
24. Save and exit from BIOS Setup.
25. Restart the system.
If the system experiences operational problems after you restart it, reprogram the BIOS using
the previous version of the BIOS that you saved to diskette.
to go to the main menu.
ENTER
.
ENTER
.
ENTER
to return the BIOS parameters to their default settings. If you
F5
ENTER
to select the Directories box. Press
TAB
. Press
ENTER
.
ENTER
.
ENTER
25
.
.
ENTER
.
ENTER
to select
TAB