Updating The Bios; Td-22, Td-25 Bios - Intergraph TD-22x System Manual

TD-220 BIOS
If you have a version of the BIOS previous to 01.00.11.CS1, do the following in BIOS Setup:
u
On the Advanced/Plug and Play Configuration screen, set Configuration
Mode to Use ICU.
u
On the Advanced/Plug and Play Configuration screen, set Boot with PnP
OS to None.
u
On the Advanced/Peripheral Configuration screen, set Secondary IDE
Interface to Disabled.
TD-225 BIOS
Do the following in the Advanced Setup menu in BIOS Setup:
u
Set the 1st Boot Device to be the floppy disk drive.
u
Set the 2nd Boot Device to be the SCSI disk drive.

Updating the BIOS

From time to time, new versions of the system's BIOS are made available on the IBBS. You
may want to update the system's current BIOS with a new version to take advantage of fixes
or enhancements.

TD-22, TD-25 BIOS

To update the TD-22 or TD-25 BIOS:
1. Record the BIOS parameter settings for your system. To do this, restart the system, and
press
then exit from BIOS Setup and let the system continue to boot.
2. From the IBBS login, go to Intergraph Product Centers, Systems and Networking, File
Libraries, and Delivered Drivers; select the operating system and hardware platform.
3. Find the
4. Use an unzip utility to open the
5. Insert a diskette into the floppy disk drive.
6. In the directory containing the
creates a boot diskette with the new BIOS file and the BIOS flash programming utility.
7. After the
restart the system.
during boot to run BIOS Setup. Write down the setting for each parameter;
F7
product and download it to a directory on your system.
FLASHPROG
. program completes, leave the diskette in the floppy disk drive and
INSTALL BAT
product and extract the files from it.
FLASHPROG
files, run the
FLASHPROG
. program. This
INSTALL BAT
23