Connecting Peripheral Cables; Connecting Powered Speakers - Intergraph TD-22x System Manual

Connecting Peripheral Cables

Connect the following cables to the ports on the back panel of the base unit.
u
Mouse cable to mouse port (PS/2 type)
u
Keyboard cable to keyboard port (PS/2 type)
u
Speaker power cable to keyboard/speaker power port (on a system with optional
speakers)
u
Speaker cable to speaker port (on a system with optional speakers)
u
Microphone cable to microphone port (on a system with an optional microphone)
u
Video cable from monitor to video port
u
Network cable to network port (on the optional network adapter)
u
Telephone wire to telephone jack (on the optional modem)
See the following figure and the expansion card documentation, if necessary.
All ports and cables are keyed or molded to make connecting the cables easy. If you find it
difficult to connect a cable, make sure that you are aligning the cable connector correctly
with the port.
CAUTION If you do not use Intergraph cables, ensure the cables you use are shielded to prevent
excessive electromagnetic interference (EMI). Intergraph cables are designed to reduce the
amount of EMI produced by the system.

Connecting Powered Speakers

If you purchased a multimedia option with powered speakers for your system, see the
following instructions when connecting the speakers to the system.
To connect powered speakers to the system:
1. Locate the 6-foot black power cable (packaged separately from the speakers). The cable
has identical connectors on each end.
2. Connect one end of the power cable to the keyboard/speaker power port on the back of
the base unit. See the following figure to locate the keyboard/speaker power port.
3. Connect the other end of the power cable to the DC power port on one of the speakers.
See the documentation delivered with the speakers for more information.
4. Connect the audio cable from the speaker to the Line Out port on the back of the base
unit. See the following figure to locate the keyboard/speaker power port.
3