Table of Contents
Advertisement
Adding Inserts
You can insert blank pages or pre-printed sheets in specific locations in your copy job. You must specify
the tray containing the inserts.
To add inserts to a copy job:
1.
At the printer control panel, press the Home button.
2.
Touch Copy.
3.
Touch Special Pages > Inserts.
<Note:> If Paper Supply is set to Auto Paper Select, the Paper Conflict screen appears. Select a
paper tray.
4.
To specify the number of sheets to insert, touch the Insert Quantity field, then use the
alphanumeric keypad and touch enter. Alternatively, use the arrows.
5.
To enter a location for the insert, touch the Insert After Page entry box, then use the alphanumeric
keypad to enter a page number. Touch Enter.
6.
To specify the paper tray to use for the insert:
a.
Touch Paper Supply.
b.
Touch the required paper tray.
c.
Touch OK.
7.
Touch Add. The insert appears in the list on the Inserts screen. To add additional inserts, repeat the
previous steps.
8.
Touch X. The options that you selected appear on the Special Pages screen.
9.
To edit or delete a special page entry, touch the entry in the list, then from the menu, touch the
required option.
10. Touch OK.
Specifying Chapter Start Pagination
If you select 2-sided copies, you can set each chapter to start on the front or back of the page. If
necessary, the printer leaves one side of the paper blank so that the chapter starts on the specified side
of the paper.
To specify chapter start pagination:
1.
At the printer control panel, press the Home button.
Touch Copy.
2.
3.
Touch Special Pages > Chapter Starts.
To specify the chapter start page, touch Page Number, then use the alphanumeric keypad to enter
4.
the page number. Touch Enter.
5.
For Start Chapter, select an option:
On Right Page: This option specifies the front side of the paper.
On Left Page: This option specifies the back side of the paper.
B80XX Series Multifunction Printer
User Guide
Xerox® Apps
79
Advertisement
Table of Contents
Troubleshooting
