Changing The Default Copy Settings - Xerox WorkCentre 6027 User Manual

Copying

Changing the Default Copy Settings

This section includes:
• Changing Collation ............................................................................................................................................................ 146
• Changing Reduce/Enlarge .............................................................................................................................................. 146
• Changing the Original Size............................................................................................................................................. 147
• Changing the Original Document Type ................................................................................................................... 147
• Changing Lighten/Darken .............................................................................................................................................. 147
• Changing the Default for Sharpness ......................................................................................................................... 147
• Changing the Default for Color Saturation ............................................................................................................ 147
• Changing the Auto Exposure ........................................................................................................................................ 147
• Changing Auto Background Suppression Level ..................................................................................................... 147
• Changing the Default Color Balance ......................................................................................................................... 148
• Changing the Default for 2-Up .................................................................................................................................... 148
• Changing Edge Erase ....................................................................................................................................................... 148
The printer uses the default copy settings on all copy jobs unless you change them for an individual job.
You can modify the default copy settings.
To change the default copy settings:
At the printer control panel, press the Machine Status button.
1.
2. Touch the Tools tab.
3. Touch Default Settings.
Touch Copy Defaults, then touch the option that you want to change.
4.
Changing Collation
1. Touch Collation.
2. Touch one of the following:
− Collated: Turns on collation for originals placed on the document glass only.
− Uncollated: Turns off collation.
Touch OK.
3.
Changing Reduce/Enlarge
1. Touch Reduce/Enlarge.
2. Touch one of the following:
− To select a default preset image size, touch a button.
− To set the default copy size in increments of 1%, touch the + or - buttons or use the keypad to
set the percentage.
3. Touch OK.
®
146 Xerox WorkCentre
User Guide
®
6027 Multifunction Printer