Changing The System Setup Options - Xerox WorkCentre Pro 412 User Manual

Changing the System Setup Options

Page 9-4
Use the following instructions to display or change the default
System Setup options:
½
Press [Menu/Exit] on the control panel.
½
Press or
press [Select].
½
Press or
½
To display or change any current setting for any of the
system setup options, choose a feature and press [Select].
The default setting for your selection will be displayed in the
lower line of the LCD.
½
Press or
feature you have selected.
½
Press [Select] to save the selection. The next System Setup
option appears.
½
Repeat the procedure to continue changing settings.
½
Press [Menu/Exit] to exit and return to the previous menu
level. To return to Standby mode, press [Stop].
until 'SYSTEM SETUP' appears, then
to scroll through the options.
to display the setting options for the
Xerox WorkCentre Pro 412 User Guide