Book
TOC
Chapter
TOC
Search
Quit
Adjusting Speaker Volume
Press the
button on the front panel to adjust the speaker
1
volume. If you cannot hear a dial tone, check the phone line
connection.
The display indicates the current volume level. Press the Up or
2
Down button repeatedly until the desired loudness setting is
displayed. Loudness is set in the range from 1 through 7, with 7
representing the loudest setting.
After choosing the desired volume level, press the
3
return to the Standby mode.
Setting the Clock Mode
You can configure your machine to display time using either a 12
hour or 24 hour format.
Press the Menu button, then press the System Data (01) button
1
on the one-touch keypad. PAPER SIZE appears on the display.
Press the Up button two times.
2
CLOCK MODE appears on the LCD display.
The display prompts you to select either a 12 hour or 24 hour
Clock Mode.
Previous Page
1-49
Next Page
button to