HP XP20000/XP24000 Manual page 83

Table 22 Error Codes — Part Code 0605 (continued)
Part Error Error Message
Code Number
0605 8000 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0605 8001 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0605 8002 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0605 8100 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0605 8102 This function is not supported.
0605 8122 This logical volume is busy.
0605 8136 The command was rejected,
because the licensed capacity
was exceeded. Check the
licensed capacity and specify
a command within the
licensed capacity, or add the
licensed capacity.
0605 8140 This logical volume cannot be
selected because it is used as
a volume for FlashCopy
Mirroring V2.
0605 8534 An internal logic error
occurred.
0605 8951 An error occurred on the
DKC side. If this problem
persists, call HP technical
support.
0605 8952 An error occurred on the
DKC side. If this problem
persists, call HP technical
support.
0605 8953 An error occurred on the
DKC side. If this problem
persists, call HP technical
support.
0605 8954 An error occurred on the
DKC side. If this problem
persists, call HP technical
support.
Recommended Action
Retry the operation. If this
problem persists, call HP
technical support.
Retry the operation. If this
problem persists, call HP
technical support.
Retry the operation. If this
problem persists, call HP
technical support.
If this problem persists, call
HP technical support.
Check whether the
DKCMAIN microcode version
and the SVP microcode
version are mismatched.
Wait a few seconds, and
then retry the operation.
The command was rejected,
because the licensed capacity
was exceeded. Check the
licensed capacity and specify
a command within the
licensed capacity, or add the
licensed capacity.
Confirm, and operate the
volume again.
If the problem persists, call
HP technical support.
An error occurred on the
DKC side. If this problem
persists, call HP technical
support.
An error occurred on the
DKC side. If this problem
persists, call HP technical
support.
An error occurred on the
DKC side. If this problem
persists, call HP technical
support.
An error occurred on the
DKC side. If this problem
persists, call HP technical
support.
Remote Web Console Error Codes
Severity Failure
Level Level
E 3
E 3
E 3
E 2
E 3
E 5
E 5
E 5
W 5
E 3
E 3
E 3
E 3
83