HP XP20000/XP24000 Manual page 340

Table 58 Error Codes — Part Code 6610 (continued)
Part Error
Code Number
6610 59323
6610 59324
6610 59325
6610 59326
6610 59327
6610 59328
6610 59329
6610 59330
6610 59332
340 Remote Web Console for Storage System Messages and Error Codes
Error Message
The entered parameter is
invalid.
The serial number, the LDKC
number or the journal group
to be added is not specified.
Some of the specified journal
groups belong to an
extended consistency group
(EXCTG). The timer type for
journal groups which belong
to EXCTG must be System.
A pair which is ready for
Delta resync cannot be
created under the current
status of the specified master
journal group. Check the
status of the specified master
journal group.
Specify a mirror ID other than
0 if you create a pair ready
for Delta resync.
You cannot specify [Entire] or
[None] to the Initial copy
mode under the current status
of the specified master
journal group. Check the
status of the specified master
journal group.
The journal volume cannot be
deleted, because the attribute
of the mirror for the journal
group is master and the status
of the mirror is Hold or
Holding.
The serial number of the local
DKC is entered. Select the
check box when you add the
journal group of the local
DKC to the extended
consistency group (EXCTG).
The local DKC cannot be
specified for the extended
consistency group (EXCTG),
because the serial number
other than the local DKC is
entered. Delete the entered
DKC to use the journal group
of the local DKC.
A multi-platform volume is
included in the specified
volumes.
The Add Pair operation
cannot be performed using
multi-platform volumes.
Recommended Action
Check the entered parameter.
Check whether the specified
journal groups include
journal groups which belong
to an extended consistency
group (EXCTG).
Check the status of the
specified master journal
group.
Specify a mirror ID other than
0.
Check the status of the
specified master journal
group.
Change the status of the
mirror of the journal group to
Initial, and then retry the
operation.
Click the check box when
you add the journal group of
the local DKC to the extended
consistency group (EXCTG).
Delete the entered DKC to
use the journal group of the
local DKC.
Confirm whether the specified
volume is a multi-platform
volume. Also, confirm the
version of the microcode of
the storage system.
Severity Failure
Level Level
W 0
W 0
W 0
W 0
W 0
W 0
W 0
W 0
W 0