HP XP20000/XP24000 Manual page 31

Table 3 Error Codes — Part Code 0003 (continued)
Part Error Error Message
Code Number
0003 1916 You cannot set the volumes
in the same parity group
across multiple CU groups.
0003 1917 The volume(s) in CLPR cannot
be set across multiple CU
groups.
0003 1919 The newly added LDEV has
not been formatted. Check
the blocked LDEV and format
the LDEV.
0003 2001 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0003 2002 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0003 2003 Auto LUN, QuickRestore, etc.
are in process. After you
reply to this message, a
window that shows only the
Refresh button will be
displayed. Wait for a while,
and then select [Refresh].
0003 2004 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0003 2005 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0003 2006 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0003 2009 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
Recommended Action
Correct the settings, and then
retry the operation.
Correct the settings, and then
retry the operation.
Check the blocked LDEV and
format the LDEV.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
After you reply to this
message, a window that
shows only [Refresh] will be
displayed. Wait a few
seconds, and then click
[Refresh].
If this problem persists,
inconsistency of configuration
may have occurred. Call HP
technical support. If the
problem occurred when
starting SVP, check the
version number of the
microcode and the
configuration information.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Remote Web Console Error Codes
Severity Failure
Level Level
E 6
E 6
W 6
E 2
E 2
E 3
E 2
E 2
E 2
E 2
31