HP XP20000/XP24000 Manual page 386

Table 64 Error Codes — Part Code 7105 (continued)
Part Error
Code Number
7105 68747
7105 68749
7105 68767
7105 68768
7105 68769
386 Remote Web Console for Storage System Messages and Error Codes
Error Message
The command has been
rejected because FICON(R)
Data Migration Source
Volume is used in the
specified pair, and T-VOL is
used with other program
products.
TrueCopy for Mainframe
Universal Replicator for
Mainframe
Compatible FlashCopy(R)
FlashCopy Mirroring V2
Volume Retention
Manager
The command has been
rejected, because the
specified S-VOL is used as a
R-VOL of TrueCopy
Asynchronous for Mainframe
pair.
The XP Business Copy
Operation for FICON(R) Data
Migration failed, because the
specified pair consisted of an
S-VOL other than a FICON(R)
Data Migration Source
Volume, or a T-VOL that is a
FICON(R) Data Migration
Source Volume.
The XP Business Copy
Operation for FICON(R) Data
Migration failed, because the
pair status of the specified
pair was not SIMPLEX or
DUPLEX.
The XP Business Copy
Operation for FICON(R) Data
Migration failed, because the
pair status of the specified
pair was not Suspend(Mig.).
Recommended Action
Cancel the setting to use the
T-VOL with other program
products, and then retry the
operation.
The command cannot be
executed because the
TrueCopy Asynchronous for
Mainframe pair is not in the
Split state. See the
Interoperability with Other
Products and Functions
section in the Hitachi
ShadowImage™ for
Mainframe User's Guide: HP
XP24000 Disk Array, HP
XP20000 Disk Array for the
relationship between the state
of TrueCopy Asynchronous
for Mainframe pair and the
ShadowImage for Mainframe
operations.
The XP Business Copy
Operation for FICON(R) Data
Migration cannot be
executed in the current pair
configuration. Specify
FICON(R) Data Migration
source volume for S-VOL, and
specify volumes other than
FICON(R) Data Migration
source volume for T-VOL.
The XP Business Copy
Operation for FICON(R) Data
Migration cannot be
executed in the current pair
status. Change the status of
the pair to SIMPLEX or
DUPLEX, and then retry the
operation.
The XP Business Copy
Operation for FICON(R) Data
Migration cannot be
executed in the current pair
status. Change the status of
the pair to Suspend(Mig.),
and then retry the operation.
Severity Failure
Level Level
i 0
W 5
i 0
i 0
i 0