HP XP20000/XP24000 Manual page 22

Table 3 Error Codes — Part Code 0003 (continued)
Part Error
Code Number
0003 1041
0003 1042
0003 1043
0003 1044
0003 1045
0003 1046
0003 1048
0003 1049
0003 1051
0003 1059
0003 1061
0003 1062
22 Remote Web Console for Storage System Messages and Error Codes
Error Message
The CU number and the LDEV
number set in the VLL
operation are the same as
those of other volumes.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
The specified Subsystem ID
already exists. Specify
another SSID.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, please call HP
technical support.
An error occurred during SVP
processing. If this problem
persists, please call HP
technical support.
An error occurred. If this
problem persists, call HP
technical support.
Security Switch Off operation
and path adding operation
cannot be performed
simultaneously. Check the
current configuration and
then make settings again.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
Recommended Action
Check and correct the
settings. If Volume Initialize
and Make Volume are
specified at the same time,
operate them separately.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Correct the specified content,
and issue the request again.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
You are trying to perform
LUN Manager operation for
non-Fibre port. The error does
not occur normally because
it is guarded in the screen. In
the unlikely event that this
error occurs, contact HP
technical support.
First, add paths, and then
click Apply. Next, turn off the
security switch, and then click
Apply.
If this problem persists, call
HP technical support.
Severity Failure
Level Level
E 6
E 2
E 2
E 2
E 6
E 2
E 2
E 2
E 2
E 2
E 6
E 2