Table 35 Error Codes — Part Code 3010 (continued)
Part
Error
Code
Number
3010
5054
3010
5055
3010
5056
3010
5057
152 Remote Web Console for Storage System Messages and Error Codes
Error Message
Execute any of the
corresponding items below
before deleting LDEV:
However, LDEV cannot be
deleted when it is a remote
command device.
delete the paths
associated with the LDEV.
release the LUSE volume.
release the reserved
volume of Auto LUN.
remove the Volume
Security settings from the
volume.
set the access attribute of
the LDEV to read/write.
release the Pool settings
from the volume.
release the JNL settings
from the volume.
release the quorum disk
settings from the volume.
There is no volume to be
initialized.
A volume cannot be
initialized when it is:
defined with a path or
paths,
used as a LUSE volume,
reserved for Auto LUN,
paired with another
volume,
set as a command device,
used for Volume Security,
not read/write-enabled,
used as a Pool volume,
used as a JNL volume,
used as a remote
command device volume,
or
used as a quorum disk.
Select LDEVs after canceling
the automatically selected
LDEVs.
There are not enough LDEVs.
Recommended Action
Check the content of the
operation.
Check the content of the
operation.
Check the content of the
operation.
Check the content of the
operation.
Severity
Failure
Level
Level
W
5
W
5
W
5
W
5