HP XP20000/XP24000 Manual page 365

Table 61 Error Codes — Part Code 7005 (continued)
Part Error Error Message
Code Number
7005 68803 The Quick Restore command
has been rejected because
P-VOL or S-VOL of Business
Copy is combined with XP
Continuous Access
Asynchronous, and also CLPR
numbers of P-VOL and S-VOL
of Business Copy are different
in the specified pair.
7005 68808 The command has been
rejected, because the
specified P-VOL is an XP Thin
Provisioning volume whose
capacity is being added.
7005 68809 The command has been
rejected, because the
specified S-VOL is an XP Thin
Provisioning volume whose
capacity is being added.
7005 68810 The command has been
rejected, because the
specified reserved volume is
an XP Thin Provisioning
volume whose capacity is
being added.
7005 68814 The Initialize function cannot
be executed, because a XP
Continuous Access pair, a XP
Continuous Access Journal
pair, or an XP External
Storage Access Manager
pair is created by using XP
Thin Provisioning volumes.
7005 68835 The command has been
rejected, because the
specified P-VOL is used by a
pair of XP Snapshot, which is
registered in the CTG.
7005 68836 The command has been
rejected, because the
specified S-VOL is used by a
pair of XP Snapshot, which is
registered in the CTG.
7005 68837 The command has been
rejected, because the
specified P-VOL is a volume
of XP Thin Provisioning whose
zero data is discarded.
7005 68838 The command has been
rejected, because the
specified S-VOL is a volume
of XP Thin Provisioning whose
zero data is being discarded.
Recommended Action
Delete the XP Continuous
Access Asynchronous pair,
and then retry the operation,
or use Reverse Resync
instead.
The operation is not available
because the target volume
has capacity changes. Check
the capacity of the volume
and retry the setting.
The operation is not available
because the target volume
has capacity changes. Check
the capacity of the volume
and retry the setting.
Confirm the capacity of the
volume and retry the setting.
Delete the XP Continuous
Access pair, XP Continuous
Access Journal pair, or XP
External Storage Access
Manager pair that is using XP
Thin Provisioning Volumes,
and then retry the operation
Release the pair of XP
Snapshot that is using the
specified P-VOL, and then
retry the operation.
Release the pair of XP
Snapshot that is using the
specified S-VOL, and then
retry the operation.
Wait until the process of
discarding zero data is
completed, and then retry the
operation.
Wait until the process of
discarding zero data is
completed, and then retry the
operation.
Remote Web Console Error Codes 365
Severity Failure
Level Level
i 0
i 0
i 0
i 0
i 0
i 0
i 0
i 0
i 0