HP XP20000/XP24000 Manual page 348

Table 61 Error Codes — Part Code 7005 (continued)
Part Error
Code Number
7005 8518
7005 8519
7005 8520
7005 8521
7005 8522
7005 8523
7005 8524
7005 8525
7005 8526
7005 8527
7005 8528
7005 8529
7005 8530
7005 8531
7005 8532
348 Remote Web Console for Storage System Messages and Error Codes
Error Message
You cannot create a pair,
because the track format is
different for each. Make sure
that the specified emulation
type is the same for both.
You cannot set a pair
because the number of
cylinders is different for each.
Make sure that the capacity
is the same for both.
You cannot set a pair,
because the volume type is
different for each.
The number of multiple copy
jobs exceeded the maximum.
The emulation type of the
P-VOL is not supported.
The emulation type of the
S-VOL is not supported.
The emulation type is not
supported.
An internal logic error
occurred.
An internal logic error
occurred.
An internal logic error
occurred.
An internal logic error
occurred.
An internal logic error
occurred.
An internal logic error
occurred.
An internal logic error
occurred.
The command has been
rejected, because the P-VOL
or the S-VOL is being used by
the host.
Recommended Action
Check the emulation type.
Check the volume capacity.
Specify the volume of the
same emulation type, and
retry the operation.
Check the contents, and retry.
Specify the emulation type
supported in HOMRCF.
Specify the emulation type
supported in HOMRCF.
Specify the emulation type
supported in HOMRCF.
Call HP technical support.
Call HP technical support.
Call HP technical support.
Call HP technical support.
Call HP technical support.
Call HP technical support.
Call HP technical support.
Stop the usage by the host.
Severity Failure
Level Level
i 0
i 0
i 0
i 0
i 0
i 0
i 0
E 0
E 0
E 0
E 0
E 0
E 0
E 0
i 0