HP XP20000/XP24000 Manual page 17

Table 2 Error Codes — Part Code 0002 (continued)
Part Error Error Message
Code Number
0002 6050 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0002 6051 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0002 6502 Now processing. Please Wait
a few seconds, and then retry
the operation.
0002 6531 The SVP is busy. Please wait
for a while, and then retry the
operation.
0002 7030 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0002 7060 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0002 71 1 1 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0002 721 1 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0002 8005 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0002 9000 Another user has lock, try
again later.
0002 9001 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0002 9999 An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
0002 56524 This function cannot be used
by the storage partition
administrator.
Recommended Action
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Log on again after a while.
If the same problem persists
despite retrying, call HP
technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Another user is accessing
with Modify mode. Wait a
few seconds and retry.
If this problem persists, call
HP technical support.
If this problem persists, call
HP technical support.
Select another window. To
set this function, contact the
storage administrator.
Remote Web Console Error Codes
Severity Failure
Level Level
E 2
E 2
W 0
W 3
E 2
E 2
E 2
E 2
E 2
E 5
E 2
E 2
E 3
17